98a(transparent), 95a(orange), 92a(yellow), 89a(green), 86a(red), 83a(purple) and 80a(white
The Cuei Hydrotech Bushings were developed to bring something that can't be found on the market which is a stable material that has a superior "deep lean" that allows you to ride as much as possible on a tuck position. The result is a special bushing that brings complete freedom of lines in the carve and high control of the board, being very agile and at the same time having a steady center to bring that confidence. Many people who had the opportunity to test these bushings said that, when they went back to their old bushings, they noticed the lack of full control of their skateboard.
They are produced with a SELECT MIX of 3 rebound levels for 7 durometers: more rebound for softer material and less for higher duros. They come in two different sizes, standard 15.5mm, and tall 19.25mm, and seven different durometers, 98a(transparent), 95a(orange), 92a(yellow), 89a(green), 86a(red), 83a(purple) and 80a(white). All of this along with a new inner size for very precise fit, which makes the feel fluid and locked while turning.
Last but not least, of course we decided to make full barrels with our bushings. Barrels have continuous tension all the way through its compression/expansion amplitude, maintaining their lean for tuck corners and stability all the way. Full barrels are easy to adjust and they rest on full contact on the hangers and baseplates for much better absorption of imperfections on the pavement. Welcome to this new era!!
error
Your review appreciation cannot be sent
feedback
Report comment
Are you sure that you want to report this comment?
check_circle
Report sent
Your report has been submitted and will be considered by a moderator.
error
Your report cannot be sent
Write your review
check_circle
Review sent
Your comment has been submitted and will be available once approved by a moderator.
PSD 65d Urethane Concave FootStop.
Designed by Pritchard Skate Designs in the UK and manufactured by RipTide Sports in the U.S., the IN-Side Concave Footstop is made of a resilient 65d Urethane....
Ils servent à éviter tout frottement des flasques (parois) des roulemets contre le truck et l'écrou, permettant ainsi un fonctionnement parfait de l'ensemble.
Les Speed Rings sont les petites...
Les bagues Juju premium de Mindless sont fabriquées à l'aide de leur uréthane Mojo personnalisé et sont disponibles en quatre duros; Carve 83a (Vert), Freeride 90a (Violet), Race 94a (Bleu) et...
Internally lubricated for smooth, fast, low-friction transitions in any competitive discipline.
Standard Barrel Height = .60" / 15.24mm
Tall Barrel Height = .75" / 19 mm tall
Set of 2 bushings = 1...
Vendu à l'unité.
Ces pads permettent de changer la géometrie de vos trucks et/ou de les surélever...
Ils sont sont en caoutchouc souple (60a)
Ces pads étant plus épais que la normale d'un...
Sold as a pair of 2 bushings
98a(transparent), 95a(orange), 92a(yellow), 89a(green), 86a(red), 83a(purple) and 80a(white
The Cuei Hydrotech Bushings were developed to bring something that can't be...
Set de 8 vis cruciformes à tête coniques pour la fixation des trucks sur votre planche.
1" correspond à environ 2,5cm
1"1/4 correspond à environ 3,2 cm
1"1/2 correspond à 3,8 cm
2" correspond à 5...
Les entretoises se montent dans la roue entre les deux roulements. Cela permet de rigidifier l'ensemble, lors du serrage, par conséquent, de réduire fortement le jeux des roulements dans la roue....
Sized to fit properly in conventional "Indy-style" trucks
Custom APS Urethane Formula for ultra-performance and sweet rebound
.975" Dia x .5" High (24.77mm Dia x 12.7mm High)
Excellent choice for...
Les Pads CP Seven Suns, fabriqués en France, ont été conçus pour les Boards montées en Drop Trough. Ceux-ci se placent sous la planche afin de servir de support aux écrous.
En général, même avec...
error Your review appreciation cannot be sent